How to connect the steel wire rope of the guide rail elevator?

1、調解導軌式升降貨梯電纜庇護架和電纜托架的地位，確保電纜在電纜庇護架"U

1. Adjust the position of cable shelter and cable tray of guide rail elevator to ensure that the cable is on the "U" of cable shelter

2、將電纜接電源箱上，發動起落機查抄電纜是否環繞糾纏;

2. Connect the cable to the power box, start the landing gear and check whether the cable is wrapped and entangled;

3、將導軌式升降貨梯電纜牢固在電纜托架上，將電纜插頭插入插座;

3. Firmly fix the cable of the guide rail type goods elevator on the cable bracket and insert the cable plug into the socket;

4、放出約2.5米的電纜，以便把導軌式升降貨梯電纜接到電源箱上;

4. Lay out about 2.5m of cable to connect the cable of guide rail elevator to the power box;

5、導軌式升降貨梯用起重東西將電纜卷吊掛于電纜筒上方，防止導軌式升降貨梯動手造成變亂。

5. The guide rail type cargo elevator uses lifting tools to hang the cable coil above the cable drum to prevent the guide rail type cargo elevator from causing chaos.

6、一樣的方法將鋼絲繩的另外一端用繩卡牢固在繩輪上電纜庇護架的安置：

6. Fix the other end of the steel wire rope on the rope sheave with a rope clamp in the same way. The placement of the cable shelter frame:

7、從導軌式升降貨梯電纜筒底部拉出電纜電源箱，暫不要毗連;

7. Pull out the cable from the bottom of the cable barrel of the guide rail elevator to the power box, and do not connect it temporarily;

8、將電纜一圈一圈順時針放入電纜筒中，盡可能使每圈一樣大，其直徑略小于電纜筒直徑;

8. Put the cable into the cable drum clockwise one circle at a time, try to make each circle as large as possible, and its diameter is slightly smaller than the diameter of the cable drum;

9、在導軌式升降貨梯導軌架加高的進程中要同時安置電纜庇護架。

9. In the process of heightening the guide rail frame of the guide rail type cargo elevator, the cable shelter frame shall be placed at the same time.

本文的精彩內容由液壓貨梯廠家提供知識提供，本網站還有很多的精彩內容，更多的內容您可以點擊進入：www.cssnam.com我們有專門的客服為您解答問題

The wonderful content of this article is provided by the manufacturer of hydraulic cargo elevator. There are many wonderful contents on this website. You can click to enter: www.qingfeijixie.com Cn we have special customer service to answer your questions