Mobile boarding bridge is no stranger to logistics and warehousing companies. It loads and unloads goods together with the forklift truck, which can greatly improve the work efficiency, reduce the work difficulty, and effectively ensure the safety of goods. Of course, the premise to achieve this effect is that the company can correctly operate the mobile boarding bridge. Unfortunately, many companies often abuse the mobile boarding bridge when using it, which will cause unnecessary damage to the boarding bridge and shorten the service life of the mobile boarding bridge.

據國內著名的移動登車橋制造商蘇州宇澤起重機械技術有限公司總工程師小編先生介紹，在使用移動登車橋之前，應檢查設備卸荷閥是否擰緊，確認卸荷閥擰緊在關閉的前提下，即可開始操作。同時，應對操作員進行培訓，以充分了解和理解移動登車橋的使用和維護，這不僅有助于設備的熟練操作，而且有助于發現設備異常情況和故障。

According to Mr. Xiao Bian, the chief engineer of Suzhou Yuze Crane Machinery Technology Co., Ltd., a famous manufacturer of mobile boarding bridge in China, before using the mobile boarding bridge, first check whether the unloading valve of the equipment is tightened, and confirm that the operation can be started after the unloading valve is tightened and closed. At the same time, professional training shall be provided for operators to fully understand and understand the use and maintenance of mobile boarding bridge, which is not only helpful for skilled operation of equipment, but also helpful for finding abnormal conditions and faults of equipment.

他說，總體而言，移動登車橋的操作分為以下步驟：

He said that, in general, the operation of the mobile boarding bridge is divided into the following steps:

1.使用液壓桿將活動的登機橋搖所需的位置高度，該高度通常應高于卡車行李箱板。

1. Use the hydraulic lever to swing the movable boarding bridge to the required height, which should be generally higher than the trunk plate of the truck.

2.將卡車倒轉登機橋的舌板區域，打開手動泵閥，讓登機橋的舌板緩慢下落，將其壓在卡車貨箱的底部，然后將手冊鎖定泵閥。

2. Reverse the truck to the tongue area of the boarding bridge, open the manual pump valve, let the tongue of the boarding bridge fall slowly, press it on the bottom of the truck cargo box, and then lock the pump valve with the manual.

3.放下活動登機橋支撐，以確保將登機橋穩定地支撐在地面上。

3. Lower the movable boarding bridge support to ensure that the boarding bridge is stably supported on the ground.

4.使用板唇兩側的掛鉤將活動登機橋固定在卡車的側面，以防止登機橋與卡車分離。

4. Use hooks on both sides of the plate lip to fix the movable boarding bridge on the side of the truck to prevent the boarding bridge from separating from the truck.

5.將登機橋兩側的制動塊移輪胎的后部，以防止輪胎滑落。

5. Move the brake pads on both sides of the boarding bridge to the rear of the tire to prevent the tire from slipping.

6.放低活動登機橋兩側的后擋板，使登機橋呈斜坡?tīng)?，將地面與卡車連接起來

6. Lower the tailgate on both sides of the movable boarding bridge to make the boarding bridge slope and connect the ground with the truck

7.當確認設備完全固定，支撐框架穩定且制動塊已有效放置時，即可開始使用活動登機橋。

7. When it is confirmed that the equipment is completely fixed, the support frame is stable and the brake block has been effectively placed, the movable boarding bridge can be used.

小編提醒企業，在移動登車橋舌和貨車連接后，將手動閥鎖緊，并用舌板兩側的鉤子將登機橋和貨車固定，這樣可以有效避免分離移動登車橋和卡車。造成不必要的人身傷害和財產損失。

The small group reminded the enterprise that after the mobile boarding bridge tongue is connected with the truck, the manual valve is locked and the boarding bridge and truck are fixed with hooks on both sides of the tongue plate, which can effectively avoid separating the mobile boarding bridge and truck. Cause unnecessary personal injury and property loss.

此外，他還提醒大家，在使用移動登車橋時，要注意使設備保持在不發生油缸掙扎的狀態，并且不要讓移動式頂升油缸在高負荷下工作。長時間延長設備使用壽命。

In addition, he also reminded everyone that when using the mobile boarding bridge, attention should be paid to keeping the equipment free of cylinder struggle, and do not let the mobile jacking cylinder work under high load. Prolong the service life of the equipment.